Liberty LL10H Series Progressive Cavity Pump
The Liberty Process LL10H Progressive Cavity Pump represents an ideal investment for heavy-duty treatment pumping applications like industrial wastewater pumping, sewage removal, and effluent flow control in the wastewater process. The LL10H is an optimal choice for the wastewater industry with its ability to handle biosolids and waste effluent with high solids content.
The LL10H's flow rate is (27 gallons/100 revolutions) from 22 GPM up to 140 GPM and is a standard flanged pump design manufactured with high strength cast iron or 316 stainless steel pump casings and designed in 1 and 2 stages for 75 or 150 psi discharge pressures.
LL10H pump parts are direct drop in aftermarket replacements that are dimensionally interchangeable with the *Moyno® L10H Series, *Tarby® TL10H Series and *Continental® CL10H Series* and have been in use in wastewater pumping facilities throughout North America now for over a decade.
The LL10H is a modular design with simple hardened pinned joint drive assembly. The LL10H Rotors are typically hardened tool steel or 316 stainless steel with a hard chrome plating for long life in abrasive pumping applications.
All other wetted parts are either carbon steel or 316 stainless steel. Stators are available in many elastomer materials such as Buna Nitrile, Natural Rubber, EPDM and Viton. The standard seal design is a set of packing with a lantern ring set and flush connectors. Mechanical seal options are readily available.
In the field of wastewater transfer and wastewater processing, the LL10H is a widely accepted unit both for its pumping capability with biosolids and for its durability in the wastewater process.
Contact a Liberty Process representative today for more information about the LL10H Series.
Liberty Series - LL10H - Technical Data
|Flow Rate||22 - 140 GPM|
|Pressure||0 - 150 PSI|
|Seal Options||Packing and Mech. Seal|
|Base Options||Carbon Steel & Stainless Steel|
|INLET / OUTLET||6" / 5"|
|Rotors||Tool Steel & Stainless Steel, Chrome-Plated|
|Stators||Buna / Viton® / EPDM / Rubber|
|Motor Options||5, 7.5, 10 and 15 HP|
- Modular Design
- Maintenance Free
- Easy Assembly/Disassembly
- Simple Pin Joint Design Connections
- NPT Discharge Connections
- Low Shear
Purchase the LL10H Pump & Parts
Liberty LL10H Pumps
Liberty LL10H Parts
Connecting Rod Kit
Bearing Cover Plate
Bearing Lock Nut
Bearing Lock Washer
Collar Pin Retainer
Pumps and pump parts offered for sale by Liberty Process Equipment, Inc. are made in the United States, Germany, India, Spain, Argentina and Brazil.
*Liberty Process Equipment, Inc. is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® All referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.