Justice LJ6 Series Progressive Cavity Pump

Liberty Process Justice LJ6 Series Open-Hopper Progressive Cavity Pump

The Liberty Process Justice LJ6 Series Open Hopper Progressive Cavity Pump represents an ideal pumping solution for viscous solutions with high solids contents such as rendering plant wastes in the poultry, pork and beef industry. Flow rates of 5.20 GPM per 100 Revolutions (5 to 30 GPM) at 225 PSI are standard through the range of the series. The Justice Series offers a design of a heavy-duty auger mated to a rotor and stator for the most difficult pumping applications available today.

The large rectangular feed hopper design easily accommodates your pumping medium while the non-pulsating design of the product produces a low-shear flow that conveys your medium along effortlessly. Solids in suspension of up to 50% are accommodated by the Auger design.

The modular design of the Justice Series Open Hopper Progressive Cavity Pump is a hardened pinned-joint drive assembly with a body available in steel or stainless steel and internal wetted components in either stainless steel or hardened tool steel with hard chrome plating for long-life and durability in abrasive pumping applications.

Rotors and Stators for the Justice Series are available in 1, 2, and 3 stages for applications with 75, 150, and 225 PSI discharge pressures with stators available in Buna Nitrile, Viton, EPDM and Natural Rubber. The standard seal design is a set of packing with a lantern ring and flush connections. Mechanical Seal options are readily available.

The Liberty LJ6 Progressive Cavity Pump parts are direct aftermarket replacements that dimensionally interchange with the Moyno® J6 Series, and the Tarby® TJ6 Series.*

Contact a Liberty Process representative today for more information about the Justice Series

Justice Series - LJ6 - Technical Data

Flow Rate 5 - 30 GPM
Pressure 0 - 225 PSI
Seal Options Packing and Mech. Seal
Base Options Steel and Stainless Steel
INLET / OUTLET 14.5" x 8" / 2-1/2" NPTF
Rotors Tool and Stainless Steel, Chrome Plated
Stators Buna / Viton® / EPDM / Rubber
Motor Options 1.5, 2, 3, 5 HP

Pump Features

  • Large Hopper
  • Welded Auger
  • Hardened Joints
  • Packing or Mechanical Seal
  • 3-Stage Options
  • Steel or Stainless Steel

Compatibility

Purchase the LJ6 Pump & Parts

Justice LJ6 Pumps

Justice 2LJ6 Progressive Cavity Hopper Pump
Justice 2LJ6
CDQ
Justice 3LJ6 Progressive Cavity Hopper Pump
Justice 3LJ6
CDQ

Justice LJ6 Parts

Justice LJ6 Drive Shaft
Justice LJ6
Drive Shaft
Justice LJ6 Pump Reducer
Justice LJ6
Pump Reducer
Justice LJ6 Pump Auge
Justice LJ6
Pump Auger
Justice LJ6 Bearing Lock Nut
Justice LJ6
Bearing Lock Nut
Justice LJ6 Bearing Lock Washer
Justice LJ6
Bearing Lock Washer
Justice LJ6 Thrust Grease Sea
Justice LJ6
Thrust Grease Sea
Justice LJ6 Stator Support Foot
Justice LJ6
Stator Support Foot

Pumps and pump parts offered for sale by Liberty Process Equipment, Inc. are made in the United States, Germany, India, Spain, Argentina and Brazil.

*Liberty Process Equipment, Inc. is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® All referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.