Close Menu

J175G1L Series

J175G1L Sludge and Mixed-Biosolids Pump

Millennium Series Icon The J175G1L Progressive Cavity Pump is ideal for sludge treatment and for pumping both light and coarse sludges and secondary mixed biosolids. The J175G1L's flow rate is 175 gallons/100 revolutions @ 518 to 788 GPM is coupled to its high temperature resistance of up to 350° degrees Fahrenheit.

All replacement pump parts for the J175G1L series dimensionally interchange with other popular manufacturers pump models like the *Moyno® 2000 Series, the *Tarby® Century V Series, and the *Continental CG Series of Progressive Cavity Pumps as aftermarket replacements.

Sludge and Biosolids Pumping puts heavy rotational forces on a progressive cavity pump. The J175G1L's heavy-duty construction allows it to perform in the difficult environments of the wastewater industry and liquid sludge and Biosolids transfer field with its heavy-duty construction.

The J175G1L's low shear and gentle pumping action enables it to pump fluids and not emulsify the liquid making it an ideal mixed-biosolids or a sludge removal and transfer pump with a solids handling capability of up to 50% by weight.

The J175G1L is a standard ANSI flanged pump manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures. Standard suction and discharge flange size for the J175G1L is 10".

The pump's modular design comes with a positively sealed, hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating for long-life pumping and a wide selection of stators in Buna Nitrile, Viton®, EPDM and Natural Rubber. All other wetted parts are either carbon steel or 316 stainless steel. The standard seal design is a set of packing with a Lantern Ring and flush connections. Mechanical seal options are available.

Contact a Liberty Process Equipment Representative today for more information about the Millennium J175G1L Series of Progressive Cavity Pumps for Sludge and Bio Solids removal.


Millennium Series - J175G1L - Technical Data


Pump Quick Links

Pump Features

Compatible Pumps

The Liberty Millennium Series J175G1L Progressive Cavity Pump is ideal for high viscosity liquids and heavy waste solids and other abrasive pumping applications such polymer feed in water treatment facilities.
Millennium J175G1L Series Progressive Cavity Pump Downloadable PDF
J175G1L
Pump PDF
Millennium J175G1L Series Progressive Cavity Pump Curves
J175G1L
Pump Curves
Millennium J175G1L Series Progressive Cavity Pump Drawings
J175G1L
Pump Drawing
Millennium J175G1L Series Progressive Cavity Pump Performance
J175G1L
Performance
Millennium J175G1L Series Progressive Cavity Pump Manual
J175G1L
Pump Manual

Millennium J175G1L Series Pump Parts

View all of our parts for the Millennium J175G1L Series and buy online!

Millennium J175G1L Series Pump Parts

Pumps available online

  • Single Stage Heavy-Duty Progressive Cavity Pump Buna Nitrile Stator/ CP Steel Rotor/ Packing Seal from Liberty Process Equipment.

J175G1L Pump Parts Available Online

J175G1L Pump Stators available online

J175G1L Pump Stator Assembly available online

J175G1L Pump Rotors & Rotor Assembly available online

J175G1L Pump Drive End Parts available online

J175G1L Pump Drive Shaft Assembly available online

J175G1L Pump Packing Assembly available online

J175G1L Pump Wetted Parts available online

J175G1L Pump Kits available online

*Liberty Process Equipment, Inc. is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® All referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.