Sewage and Sewage Transfer PC Pump
The F050G1L heavy duty Progressive Cavity Pump for sewage and sewage waste pumping with heavy waste solids up to 50% by weight allows even the toughest thickened sewage application to be pumped in lift stations. The F050G1L's low shear and gentle pumping action enables it to not emulsify the pumped liquid medium(s) making it an ideal pump for the sewage and liquified sewage transfer.
The F050G1L's flow rate of up to 50 gallons/100 revolutions @ 163 to 225 GPM and a temperature resistance of up to 350° degrees Fahrenheit allows it to work in the challenging environments of a sewage and waste facility.
All parts for the F050G1L series such as rotors, stators and internal wetted parts such as seals and connecting rods are aftermarket replacements that dimensionally interchange with other popular manufacturers pump models like the *Moyno® 2000 Series, the *Tarby® Century V Series, and the *Continental® CG Series of Progressive Cavity Pumps.
The F050G1L is a standard ANSI flanged sewage pump design manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures making it an ideal low-cost, maintenance free drop-in replacement pump. Standard suction and discharge flange size for the F050G1L is 6".
The modular design comes with a positively sealed hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating and a wide selection of stators in Buna Nitrile, Viton®, EPDM and Natural Rubber.
All other wetted parts are either carbon steel or 316 stainless steel. You can count on Liberty Process for your Progressive cavity sewage pump parts being shipped to your location quickly from our stock. The standard seal design is a set of packing with a Lantern Ring and flush connections. Mechanical seal options are readily available.
Contact a Liberty Process Equipment Representative today for more information about the Millennium F050G1L Series of Progressive Cavity Pumps for Waste Solids.
- FLOW RATE 163 - 225 GPM
- PRESSURE 85 - 350 PSI
- SEAL OPTIONS Packing and Mech. Seal
- BASE OPTIONS Carbon and Stainless Steel
- INLET/OUTLET 6" / 6" - ANSI Flange
- ROTORS Chrome Plated Tool Steel or Stainless Steel
- STATORS Buna Nitrile /Viton®/EPDM/Rubber
- MOTOR OPTIONS 3 - 25 HP
Millennium Series - F050G1L - Technical Data
Pump Quick Links
- Low Shear
- Solids handling up to 50%
- Hardened Joints
- Packing or Mechanical Seal
- 3-Stage Options
- Steel or Stainless Steel
Millennium F050G1L Series Pump Parts
*Liberty Process Equipment, Inc. is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® All referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.