Crude Oil and Oil Sludge Transfer Pump
The F036G1L Progressive Cavity Pump is designed with the easy movement for high viscosity liquids and heavy waste solids such as heavy crude oils, oil sludge transfer and thickened waste oils in refineries and tanker operations and as a standard crude olil sludge pump. The F036G1L's low shear and gentle pumping action make it an ideal pump for oil sludge pumping and transfer. Solids handling capability of up to 50% by weight allows even the toughest sludge application to be pumped.
The F036G1L's flow rate of 36 gallons/100 revolutions @ 100 to 162 GPM coupled to its high temperature resistance of up to 350° degrees Fahrenheit makes it an ideal solution for your industrial heavy-duty pumping needs.
All parts for the F036G1L series such as rotors, stators and internal wetted parts such as seals and connecting rods dimensionally interchange as aftermarket replacement with other popular manufacturers pump models like the *Moyno® 2000 Series, the *Tarby® Century V Series, and the *Continental® CG Series of Progressive Cavity Pumps saving you thousands of dollars in replacement part costs as in-stock aftermarket replacements and lost downtime waiting for OEM replacements.
The F036G1L is a standard ANSI flanged pump design manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, and 350 psi discharge pressures making it an ideal low-cost, maintenance free drop-in replacement pump. Standard suction and discharge flange size for the F036G1L is 6".
The Millennium's modular design comes with a positively sealed, hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating for long-life pumping and a wide selection of stators in Buna Nitrile, Viton®, EPDM and Natural Rubber.
All other wetted parts are either carbon steel or 316 stainless steel. The standard seal design is a set of packing with a Lantern Ring and flush connections. Mechanical seal options are readily available.
Contact a Liberty Process Equipment Representative today for more information about the Millennium F036G1L Progressive Cavity Pumps for crude oil sludge and sludge transfer in refineries and tankers.
- FLOW RATE 100 - 162 GPM
- PRESSURE 85 - 350 PSI
- SEAL OPTIONS Packing and Mech. Seal
- BASE OPTIONS Steel and Stainless Steel
- INLET/OUTLET 6" / 6" - ANSI Flange
- ROTORS Chrome Plated Tool Steel or Stainless Steel
- STATORS Buna/Viton®/EPDM/Rubber
- MOTOR OPTIONS 3 - 25 HP
Millennium Series - F036G1L - Technical Data
Pump Quick Links
- Low Shear
- Solids handling up to 50%
- Hardened Joints
- Packing or Mechanical Seal
- 3-Stage Options
- Steel or Stainless Steel
Millennium F036G1L Series Pump Parts
Pumps available online
- Millennium 1F036G1L CDQ Single Stage Heavy-Duty Progressive Cavity Pump Buna Nitrile Stator/ CP Steel Rotor/ Packing Seal from Liberty Process Equipment.
- Millennium 2F036G1L CDQ Two Stage Heavy-Duty Progressive Cavity Pump Buna Nitrile Stator/ CP Steel Rotor/ Packing Seal from Liberty Process Equipment.
*Liberty Process Equipment, Inc. is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® All referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.